Put setting on medium.
@juergen writes:
The changes are only active when “Medium” is chosen. Fast (or Slow) do not change anything to the status from before.
Ye, I had it on medium and with 7.50 this also solved the problem, but with 7.56 it doesnt help. Already resetted the Nuki and the wlan settings. Did unfortunately not help.
I mounted the 7.56 in the ftitz 7590 ax. In fast mode still problems but in medium, after a few hours it seems stable as with 7.50. In a previous post a user wrote to AVM that he claims to fix the problem with the upcoming 7.51 beta. It still seems to be there though with 7.56. Let’s hope Nuki fixes it before AVM.
It seems that the latest labor version has been released as 7.56.
I can confirm your findings: 7.56 did not fix the problem and the workaround in the latest Smart Lock Beta FW still works.
1 Like
The workaround “battery medium” doesn´t work with fritz os 7.56 and Nuki 3.6.9. When will Nuki 3.7 be released?
Thx Tom
Hi, workaround is only in beta 3.7.1. Are you in beta program?
If not, here is the link with instructions
Same issue here, Fritzbox 7590AX (Germany) with 7.56 and Nuki Smart Lock 3 with 3.6.9. Here as well the Nuki is the only device (among ca. 30 others in our home) which does not connect to the Fritzbox WLAN anymore (neither in WPA2 nor WPA3). Dear Nuki team - please sit together with AVM to get this fixed.
Read this for solve Momentarily.
To do this you must install the beta 3.7.1. If you are not in the beta program and want to solve it you will find above how to enter
Just installed the 3.7.1 and can confirm that the Nuki has connected successfully with the Fritzbox 7590AX (7.56). Connection is stable now since ca. 10 minutes. With the stable connection the Nuki can again be reached from outside. Looks good so far.
1 Like
installed the 3.7.1 the Nuki has connected successfully with the Fritzbox 7590AX
@Juergen
Hi, the problem is solved on 3.7.2?
If it hasn’t been resolved, in the latest firmware 3.7.2 is it still possible to turn the problem around in the same way by putting the Energy Saving in medium setting?
Thx
The “problem” was created by AVM with their software update. They are the only ones that can solve it. So far they did not provide a firmware update that fixes the problem.
Yes.
Hi, the problem has not yet been solved by AVM or NUKI with the latest updates. You rightly tell me that it was created by AVM and only it can fix it. What I don’t understand is why among hundreds of peripherals only NUKI doesn’t work. Actually only smartlock 3.0 doesn’t work because there are no problems with the bridge. Is it a WIFI chip hardware problem?. Thanks for the clarifications
This weeks 3.7.4 beta contains an automatic detection for the Fritz!Box 7590AX which turns on the fix that was already present in recent betas.
But yes, AVM did not fix the problem yet.
Because the problem is related to the power saving mechanisms the Smart Lock uses to run for months on 4xAA batteries. The fix we applied reduces the power saving and therefore works around the problem AVM introduced.
In general you can with 3.7.4 now reduce the power saving for all WiFis when setting the Smart Lock > Settings > Features & Configuration > Battery > Energy-saving mode to “Medium”. In the past this was restricted to the 7590AX (and alike) access points.
1 Like
(Offensive post deleted)
Please stay on topic and provide meaningful feedback and input which helps us to resolve the problems. Thank you!
That post wasn’t offensive it was just direct but I see criticism isn’t welcome here.
Would you still be so kind to tell us the exact problem that AVM introduced?
The firmware on AVM routers can be changed, so if you know what exactly is wrong with the AVM firmware to only affect a single product out in the market, please let us know so we can fix it ourselves.
And would you still please so kind to provide your temporary fix for your public customers and not forcing them to apply to the beta?
That would be much appreciated.
The answer is in this post: FRITZbox 7590 ax issue with Wi-Fi smart lock 3.0 pro - #70 by Juergen
We do not know what AVM changed. That‘s something they have to look into. We did of course provide detailed failure reports to them.
It‘s going to be part of the next release which is scheduled for September. Still some more feedback would be welcome. E.g. no one gave any feedback to the recent 3.7.4 release.
I have about 70 wlan devices and currently Nuki 3 is the only one having problems. So whatever AVM changed, only Nuki has a problem with it. That’s at least my own experience.
What I’m wondering, if it is a powersaving problem, why you go into power saving mode while setting up the wlan connection? As written it says password wrong constantly after retrying often enough it works.
Do you have a release plan for the 3.7.4 is going into the stable version? To be honest I have problems being a test candidate risking my property to be exposed to everyone.
Also reading the thread there is no success post that it now works instead even more strange problems are raised which if we would have them at home my wife would loose her trust and the device has to returned.
3 Likes