Hi. How have you managed to get it working?
I have a Fermax 5601 and connected the wires as in the guide:
L cable to one side of the clamp. Yellow and red to the other side
Black to -
Green and orange to L at the fermax
The bell is not ringing and I cant open the door with the fermax any more.
Normally I had to press the speak button and then the open button to open the door
But now the speak button is not working any more.
I also tried to ring bevor as you said. But neither the fermax nor the opener recognized it (no ringing)
EDIT:
I’ve done more testing today.
I tried the Fermax 5601 setting, the iloft telephone vds extra (which I guess is the same?) and the Generic VDS setting
For the wiring I tried as here posted:
Red, Orang and Green - L intercom
L Cable - Clamp
Yellow - Clamp
Black - Minus (-)
and as desribed above the wiring explained in the Guide at the app
The failure is always the same – I can open my door normally without ringing outside, I have to press the speak button. The the LED at the button lights and then I can press the open button.
When Nuki opener is installed the speak button is not working any more, the lead does not light on and only a “beep” is outputed. The door open button afterwards is also not possible.
I’ve also tried to activate the debug mode so catch some logs. But no matter what I tried, no log was displayed.