Nuki Opener and Fermax CityMax ADS (1092)

Hey gracias, menos mal que soy español :rofl:

Really awful situation where it’s said to be compatible and then I need to use a beta firmware, generic comm and bus, … Very wrong move!

Y gracias otra vez :wink:

Esta gente no se entera nada ni lee los mails, ¿podrías mandarme o subir a algún sitio y pasarme link tú la beta y las instrucciones por favor?

@Georg_S please could you provide me the details Michel talks about? Access to the beta firmware and instructions to get it up and running?

Thanks.

Tienes que mandar un correo a nuki con tu número de id del opener configurado y estando en línea. Haz la configuración como si hubiera abierto la puerta y estuviera todo ok. Una vez ya tengas el firmware 1.2.7 te paso unas indicaciones para continuar.

Gracias de nuevo compañero. Al darle directamente desde la app, veo que me sale la 1.2.7 disponible y la beta es la 1.3.0 en estos momentos, aunque sí especifica “Added support for Fermax VDS intercom systems” que es mi telefonillo:
[Nuki Opener firmware - beta release notes]

¿Me vale con esa versión? He actualizado el firmware del opener a la 1.2.7 desde la app correctamente, ¿en teoría debería estar listo para configurarlo sin tener que solicitar nada adicional?

Gracias de nuevo.

Con la 127, te sirve, haz una configuración en falso,seleccionando como sistema generic, bus generic, finalizando la configuración como si hubiera abierto correctamente, después comienza la configuración con los datos adjuntos y cableado básico de 2 hilos, modificar debug, cambiar el pin…

indicando que la puerta a abierto hasta que te indique el sistema que requiere activación, y sigue los pasos.

1 Like

Genial, gracias otra vez. Últimas preguntas, porque voy un poco (bastante) perdido:

He reconfigurado el opener como Generico > Bus genérico (beta):

  • Según esas instrucciones, tengo que coger el cable B+ en un puerto, y el amarillo y rojo (Nuki) juntos en el otro puerto, pero dice que no quite ningún cable, que deben ser cables adicionales…¿cómo sé qué cable es y dónde están?
  • ¿Cómo conecto el Opener al interfono después?
  • Me sale error si hago la falsa configuración “La instalación de tu sistema de interfono no se corresponde con el estándar”. “Conecta los cables de Nuki a tu interfono mediante una variante alternativa” (¿?)

Si pudieras indicarme qué cables conectar de manera más detallada o si hay otro hilo con algún esquema pasarme el link o algo… muchas gracias Michel, estás siendo de gran ayuda.

Las pruebas están hechas con los 127

Hi Enzo,
please send me your Nuki ID in order to give you beta access.
Sorry for the confusion. Obviously, there different models of Fermax Citymax on the market and the compatibility list is not precise enough.
With 1.3.0 beta, the Fermax VDS/ADS profile is already implemented. For doorbell suppression please see Known compatibility issues
Thank you.
Best regards
Georg

Cable negro del opener al negativo del interfono, y del rojo del opener al L del interfono, el resto de momento no los conectes y comienzas la instalación desde el principio

Can’t send a private message here :confused:

I’ve just sent a support form through the web addressing you in the body of the message and including my opener ID.

Thanks Georg, much appreciated.

De momento el naranja no, solo negro y rojo

1.3.0 beta is already installed after support contacted back, thanks for that. In the app, the profile is no there when I search Fermax and then vdf, or adf, but still, I will try to follow what @Michel_Mayoral wrote. The only thing I need to know is which cables are those in the opener, because I have a connector with many cables, not single cables, or the ones that come out from the wall…

This is really unclear and I’m null at electricity.

Still, thank you all for your effort in guiding me!

Please use “Generic” as brand and “Bus (Fermax VDS)” as model. Thank you

Kool!

I can see it and the explanation in the app differs from the one that Michel posted above.

One (I hope) quick question. Could you please point me in the pictures I attached in my firsts posts, which cables should I use? That’s the only thing preventing me to try it out.

Thanks again for your patience :smiley:

+,L and -. Don’t worry, the app will guide you. To use the Opner with doorbell suppression please see Known compatibility issues

Ive an ADS citymax 2447 and when trying to configure an opener to it i get an internal error, on fw 1.2.7 can anyone advise ?

Hi again, sorry for the abscence.

I’ve followed all the instructions the app includes and still, it cannot open the door, … all cables are tightly connected.

Summary from app instructions (Generic + Fermax VDS/ADS):

Clamp:
‘+’ Comm (red in my case)
Red & Yellow Nuki

Comm:
‘-’ Comm (black in my case) & Black Nuki
‘+’ Green
‘L’ Comm (Blue in my case) & Orange Nuki

Does nothing, again, all cables are tightly connected

Here’s the current state:

BIG HELP or I’m returning this, can’t be wasting so much time with an unfinished product described as compatible and not even without help…

PS: I’ve tried all simpler solutions above in this thread too, and nothing:
(No clamp, original setup and Black to ‘-’, red to ‘L’)
(No clamp, original setup and Black to ‘-’, red to ‘+’)

Hola!

Me estoy pegando con un Fermax 106CI06H, que supongo que es digital ya que tiene 3 cables (realmente 6, pero abre 2 puertas) dichos cables están repartidos en 3 clemas etiquetadas como “+”, “L” y “-”.
La versión que tengo de opener es la 1.2.7.

He probado varias configuraciones en base a documentaciones encontradas y ninguna ha valido, las que mejor han ido han sido las que ha aportado Michel Mayoral, pero no abre… viendo el manual del Opener interpreto que el cable azul corresponde a “OPEN”, pero no lo tengo conectado en ningún sitio…

Por cierto, que gano poniendolo en modo debug?

Alguna ayudita?

Muchas Gracias