Elcom i2 Bus (BVM-100)

onepunchdenno · October 25, 2022, 12:13pm

Got it working with the bft 210… A bit trickaroo but can get it fully working

My wife is amazed with our chill test set up. I’m writing everything down how it works within the next week or so but just wanted to let you know bft 210 is working native with nuki now

KaguyaIRiNaX · November 10, 2022, 2:08pm

Would be awesome if you could explain how you made the BFT-210 working If you’re german, please also in german, cause my english isn’t very well

onepunchdenno · December 1, 2022, 3:57pm

steffens · December 13, 2022, 8:22am

Hi Jens, did you manage to connect?
I’m having the same device and struggling to get the opener integrated.

Many thanks
Steffen

Schiemanskie · December 13, 2022, 11:04am

Anything new Dennis?

onepunchdenno · December 13, 2022, 11:34am

öhm…

https://developer.nuki.io/t/elcom-bft-210-nuki-opener-working-with-hardware-mod/18395

Schiemanskie · December 13, 2022, 11:52am

haha wasn’t expecting this thanks for the in depth analysis. I will move to a new flat in a month and I think there was a BFT-210 in place - so big thanks in advance!

onepunchdenno · December 13, 2022, 1:43pm

you´re welcome hit me up if it is so and you need the pcb

vactor007 · February 2, 2023, 3:45pm

Hi guys,

Just to be sure: does the BVM-100 works with the RSR-200?

Thanks!

Pascal_Zeh · February 2, 2023, 7:58pm

Hi! I know this thread is quite old, but I just can’t get it working and maybe you are able to help… I’ve got the same setup with bvm 100 rsr 200 and 114. The relay to open the door is working fine and you can open the door through the app. The rsr200 detects the ring as the led lights up. But somehow nuki just doesn’t recognise the ring…. Did you only connect the green cable to function one of rsr200? No bus voltage or ground connection? How did you configure the opener in the app? I used generic with now ring cable…. But doesn’t work….

vactor007 · February 13, 2023, 2:15pm

Is the 114 actually really necessary? I just have the RSR200. Actually I’m wondering where to put GND and the open door signal. There are no points of contact.
Would be happy about a picture, thanks!

Denis1 · March 9, 2023, 7:53pm

Hello Mathias,

I also have a BVM-280. Can you make a picture of your wiring? Did you change anything from Ben’s setup? Did the RED114Y fit inside the BVM-280 case okay? Any other tips? I’d really like to get this to work for me. Thank you in advance.

Denis

Denis1 · April 1, 2023, 1:10pm

Thank you @Ben!

With your picture and these comments I was able to connect my Elcom BVM-280 to my Nuki Opener. Everything works including “Ring to Open”. I just added the Elcom RED114Y as you instructed and then wired in the Nuki Opener. After that I was able to configure the Nuki Opener using the Nuki app and set the configuration to “Generic/Analog".

Only difference is that I inserted a bridge wire from “K2" to “a" on my BVM-280, and connected the Nuki Opener yellow wire to K1 on my BVM-280. Works great.

AlexNathan · May 15, 2023, 6:49pm

Did anyone get the Nuki Opener working with the Elcom BVF-210WS? Steven posted pictures and asked the question back in January but I couldn’t find a reply in the thread. I have the same intercom in my rental flat and would love to get the Opener connected. Thanks very much for your help, Alex.

mycell24 · September 15, 2023, 8:37am

Hey!
Last week our intercom system was upgraded. The new system is ELCOM digital i2 bus (Elcom BHT-200). According to the electrician, only such systems are likely to be installed. I will try using Hardware Mod from this thread to connect Nuki Opener. 3 years ago it was said that you couldn’t handle FM modulated systems yet. Will there be a solution in the near future?

charlie · September 26, 2023, 1:31pm

I guess with this two manuals you can compare and map similar functions between the bvf-510 <-> bvf-210

According to the manuals the X X are similar to the W V

Jonathan_S · October 21, 2023, 4:59am

Hello Matze Red, for me its also the BVM-280 - if you are still active, would you mind sending me a picture of you’re wiring too?

Jonathan_S · October 21, 2023, 5:02am

Hello Denis,

I am excited to test this on my BVM-280 as well! Currently I am exhausted trying to get this work… I will order the RED114Y, could you provide me with a picture of your wiring in the next few days?

Kind Regards!

Denis1 · October 21, 2023, 2:11pm

Hello Jonathan,

I did this back at the end of March, 2023. I have found some photos. Hopefully they can help you. See below.

BVM-280 before picture:
NOTE: Your line colors may differ from mine.
On BVM-280 labeled: KKRaab (left to right)

RED114Y installed:

Move the BVM-280 right “a” (white for me) and “b” (green for me) to the RED114Y, “X" (left) and “X” (right), respectively.
Run a wire (red for me) from the RED114Y “X” (left) to the BVM-280 right “a”.
Run a wire (black for me) from the RED114Y “X” (right) to the BVM-280 “b” (far right).
Connect the purple and blue from the Nuki Opener to the RED114Y ctrl-in as shown in the picture.
Connect the yellow from the Nuki Operner to the BVM-280 “K” (left).
Connect a jumper wire from the BVM-280 “K” (right) to the BVM-280 “a” (right). This jumper is black in my picture.
Be sure to set S1 to “A” and S2 to “0” on the Elcom RED114Y.

BVM-280 After:

For more help on RED114Y see also: Elcom BVF-510

Regards,

Denis

Jonathan_S · October 23, 2023, 12:17pm

Hey Denis,

thank you so much for the description - i just ordered the RED114Y and I am excited to see whether it works!
Ill give you an update as soon as i did the first tests!