Conexionado GOLMAR VESTA 2

I can’t give an advise at this point, because we don’t know yet if it will be compatible with Golmar in the future or not.

Hi,

I was about to try again (as now I have a bit more time) but now I can’t connect via Bluetooth the opener with my iPhone 11, neither bridge with opener. I turned already off the Bluetooth from my iPhone, I also took one battery out of the opener and put it back but no success. Please let me know what I can do. Cheers

  • If the Opener is connected to the intercom, remove the connection to the intercom
  • If this does not help, reboot your iPhone
  • If this does not help, insert new batteries in the Opener

Hey Lola, did you get it to work? I have the same setup (Golmar Vesta 2) and would love to have the Nuki Opener functionality to this building. And to Jürgen, yes, this is one of those intercoms that are heavily used in this neighborhood (Amsterdam, Netherlands).
Anyway, would love to hear some positive news regarding compatibility.
Cheers

Hi Ries,

No news… it’s a pity cuz I’m big cities like here in Amsterdam there are only apartments (buildings with at least 4 apartments) like in my case. My neighbors are all the time asking me if they can get the opener but as mine didn’t work I can’t advice them to buy one. Please Jurgen let us know if you have any news

There are some good and bad news:
The good news are that we have it working in our lab an will be able to release it in a beta soon.

The bad news are that a specific cabling is necessary which requires to place a resistor between two contacts. We will make instructions for this available here in the Dev Board, but it also means that Golmar Bus based intercoms will remain in beta for some time until an official „Golmar Adapter Cable“ (or similar) and all necessary modifications to the Apps are available.

1 Like

Hi Jurgen,

Cool!! So, how can we know when the beta has been released? Do we get a notification? Please let us know,

Cheers

Great news! Soldering a resistor is within my electronics skills! :slight_smile:

I’ll be keeping an eye out for the beta.

I see the beta is up at https://developer.nuki.io/t/golmar-plus-intercom-system-support/4017. It also shows a wiring diagram to a Golmar intercom, but that one is not like the Golmar Vesta 2.

I guess I will be able to get the resistor to work (since I don’t have solder iron, it will be the bottom option; thanks for taking care of the ignorant ones ;-)). But still unsure on how to connect it to my intercom. Can anyone help out here?

Thanks!!


A better picture on how things are originally wired.

Short update after some private conversations with Jürgen.
The Golmar Vesta 2 only uses two cables, how can I set it up? So it’s not possible yet?

Correct. For the 2 cable set up we don’t have a solution yet.

Okay thanks for letting me know. Do you mind if I post this on the beta forum as well, since others might have the same question. And even more importantly, are you working on a solution? Do you need help from my side? Best Regards, Ries.

No problem to share it.

We’ve a list of intercoms that we’re working on sorted by popularity. I can’t share the list nor give a timeframe for a solution, because that depends on how fast/easy the intercoms ahead or yours are to implement. Sorry!

Any news on this intercom guys? My Nuki Opener is fetching dust and still eager to get it connected.

Sorry, we are still not compatible with Vesta systems

Disappointing, but thanks for the update anyhow.

Hi there,

After 8 months waiting for compatibility, please tell me there is a solution. Not only me but all my clients are waiting for Nuki to be compatible with this model.

Cheers,

Hi Georg,

We are still waiting for compatibility, any news regarding to Vesta 2?

I would also be very interested in a solution for the Vesta 2 GB2 model.

1 Like

And one more. My Nuki Opener is fetching dust waiting for an update.

Any news on this?

1 Like

Good evening,

Any update, seems like works with resistir, is that correct?