Urmet 1133-002B

[Brian_Estrada]

Hi I’m having trouble setting up this device

On the phone it says 1133/01 and I tried that guide but wasn’t able to find the other two wires

Anyone have any idea how I should be wiring this up?

[dragan.colakovic (Dragan Čolaković)]

I have the same configuration however have not attempted setup as of yet. Have you been able to identify correct setup?

[Brian_Estrada]

I found a guide here that helped me out

Got URMET 1150/351 - 1150/35 - 1133/013 to work!

Hello, After a few hours and multiple tries, I finally got my URMET 1150/351 to work ! The PCB says 1133/013, and I know that 1150/35 should also work. This is an analogue system, but with only 2 wires. The specificity here is that the ring comes from the same wire than the rest. Here is my setup : [IMG_0660] Close-up on the wires : https://imgur.com/S4dOCSf 2 : yellow / blue CA : green 1 : purple / black I selected Urmet > 1133/20 in the app to configure the opener. Everything works …

It was this one I think

[dragan.colakovic (Dragan Čolaković)]

Brian, thank you for responding and sharing this guide. I’ll give it a shot

[Jerem (jérémie Helme)]

I have the same 1133-002B and I can confirm that the guide for the 1150/351 worked, even for the ring to open functionality

Got URMET 1150/351 - 1150/35 - 1133/013 to work!

Hello, After a few hours and multiple tries, I finally got my URMET 1150/351 to work ! The PCB says 1133/013, and I know that 1150/35 should also work. This is an analogue system, but with only 2 wires. The specificity here is that the ring comes from the same wire than the rest. Here is my setup : [IMG_0660] Close-up on the wires : https://imgur.com/S4dOCSf 2 : yellow / blue CA : green 1 : purple / black I selected Urmet > 1133/20 in the app to configure the opener. Everything works …