Hi @Georg_S,
just pinging this thread to see if you can share any update on the roadmap.
Ciao,
Lucio
Any news on this ? Still wait also for 1183/5
Hello,
Do you have update about this model?
As the problem has been revealed since 2019 (already 3 years), I suppose it’s already solved by Nuki team or someone in the community?
Hi, I was also following that topic for a long time. Maybe the announcement of Ring Intercom will change the response from Nuki, as this is definitely supporting Urmet 2Voice eg 1183/5.
Hi there,
I got a solution running on my system, but it’s pretty basic, bypassing the “open/key”-switch inside the intercom.
I was looking for a quick fix for the beginning so I configured the opener to “other door” according to the last chapter of the installation manual.
I connected the blue and violet wire at the contacts of the switch.
to be continued…
1 Like
The quick connecters shall provide an easy “uninstall” when required, without the need to disassemble the whole intercom again.
The app is configured to “other door”, so when I give the command via the app, the Nuki opener closes the circuit and the opener at the entrance door starts buzzing with a couple of seconds delay.
I also configured the Nuki opener to play a sound when the opening signal is given so I can recognize if somebody, e.g. of my family members, opens the entrance via the opener.
NOTE: The intercom has also a connection for a addition bell/speaker marked S- and S+. If you connect the intercom in accordance with the “analog configuration” from the manual, you could use these connection to receive the “ring signal” from the entrance to “activate” the NukI opener. Then the Opener could use my “bypass” to open the entrance door
With a little bit of electrical knowledge and tweaking of the app you MIGHT be able to configure “ring to open”.
Right now, unfortunately, I don’t have the time to “play around”, maybe later this year.
I hope this helps some colleges here 
1 Like
Hi @GeorgB,
thank you for your sharings. I’ve an Urmet Miro 1750/1 2 voice video intercom.
I think that your solution should work also for this model, but my question is if the Opener can be connected also to the button that calls the outdor station and simulate the pressing of this button, activate the monitor, and then open the door by pressing the other button. Can it be programmed for this?
This would be useful for not having to call the internal station to open the door when you are out.
I am considering whether to buy this system or a simple Shelly 1 with a Dry contact. Unfortunately I can see that the support for this product is very poor and even if the compatibility with these 2 voice Urmet systems was announced more than a year ago, there is still no news and no one answers the questions.
Thanks to anyone who can help me
LG
@GeorgB Did you had time to look at the additional bell and Ring To Open? I have setup the Opener like you did and it works like a charm. I also tried to connect the Ring_Detect (yellow) cable with the additional bell but did not manage to get it working.
Hi Everyone, any news about implementation of Urmet 1183?
I threw away the nuki lock in favour of Switchbot Lock and buyed also a Switchbot Bot to open the intercom. Best decision ever… sorry but the nuki support Is the worst.
Luca sei italiano? Potresti dirmi meglio cosa hai comprato e come funziona? Grazie
risposto in privato… ciao
Having an urmet 1183/5 I also stumbled upon this discussion.
I wonder why nuki does not give a definitive answer regarding compatibility with urmet 1183/5. I am a happy owner of nuki smart door and the ability to also use the opener , for me would be the ultimate in smart home
Hi everyone. Seems like there’s no possibility to install the opener on the urmet mirò (easily and for non-tech wizards like me).
I have a stupid question: if I change device to a supported one, would the opener work or the Urmet has been installed because no other possibilities were available (and supported by Nuki Opener).
BTW, 4 years and still no reply from Nuki about the possibility to integrate Urmet despite the requests…
1 Like
hi George, I am hopeful that you will receive my comment. I am glad you found a workaround for this old-school device that I sadly cannot change… Now reg. your photos and cables. I have a different setup and simply don’t understand which cables to connect with. In your case, I see a black cable going into the right connector, and miraculously a blue and a green cable come out from behind, connecting to the board. What exactly is happening there on the right side of your picture? Could you please enlighten me? Thanks in advance!
Dear Georg!
It has been over 2 years since this message. Do you have any news on that?
I managed yesterday to install the opener partially under Generic>Urmet Bus (Beta), the problem surges at the end of the installation in the app. After asking if I can open the door without someone bringing (which i cant), the app ask for someone to ring the entrace door (which works) and after that tries to recognize the “open-door” signal, which never recognizes. Is there a solution??
In my previous flat, i had a Bticino 344702, which was also a 2voice system and worked flawlessly.
Deeply hope you can help me in this situation!
Kind regards and happy holidays!