Sorry to hear that.
Hi,
I’ve got a intercom CTCINO 344282. I read all the forum because I had the same problem. But I past all the week-end find a solution, and… I FOUND it! It’s working well! you can se my plugs on pic. But now I’ve another pb, I don’t have notification when one person ring my door.
Hello Vincent,
Can you confirm that the Opener works with the Bticino BT-344282 ?
If yes, can you share your wiring diagram ? I recently moved to a new flat that have this one and I’m hesitating to buy the Opener for it.
Thanks a lot in advance!
Yes, pls share a diagram! I have the same intercom, but no light blue wire ?
Hi,
I got the opener to work with my bt-344282. the only thing i’m still trying to figure out is why the ring surpression doesnt work. This is the situation before adding the nuki opener
I can only add one image per post. let me create a second post for the situation after adding the nuki opener
1 Like
This is what the cabling looked like afterwards. I did try a setup that also worked which was to add the black nuki cable to my red wall cable in the intercom connector. The Red and Orange nuki cable with the blue wall cable in the same connector on the intercom.
In the app i selected:
Brand: Generic
Model: BUS (BTCINO).
hope this helps some other people.
1 Like
It works. Thank you.
This can be opened perfectly in the “Open Door” app.
However, in continuous mode, the signal from the Nuki Opener is too short. It only clicks briefly, which isn’t enough to open the door.
Can this be switched longer in the software? Then this would also work perfectly on the door system.
The following configuration "Generic Bus (Bitcino) is used
I hope a developer is reading along and can fix this quickly.
What do you mean with the open door app?
In continuous mode, the signal was too short for the door closer.
Now it works perfectly.
How do I get in this mode where is the option and can you sent me a photo of your cables that would be great so I can easily understand how to connect
I send you a PN
Hello,
I just received Nuki Opener. I have Bticino 344282, and I have tried the setup Maurice shown. But while configuring, I am unable to open the door with nuki app. Since that point, everything is working fine.
The only feature I need currently is to open the door with Nuki opener.
Is there any specific configuration process how to achieve this ?
Hello ppl
I have tried both Vincent Tissot as well as Maurice montages and none of them worked for me …
Here’s a picture:
Do you guys can help me out? Maybe there’s something I’m missing
Thanks
Hello Benny
Can you send me the same PN please? I’m struggling and need to figure out how to solve it, thank you! 
Do not put two cables on the green connection.
In my case, one of them had no contact. Use another clamp here and only go there with one cable
And then use the Beta Generic to set up for BTicino.
I send you a PN#
Hi Benny
Kindly ask you to share your solution for the “continous mode” also with me - thank you very much!
It works with the setting when setting up “Generic” Bticino.
You then simply set the permanent mode in the menu under Settings.
After fightining and struggling so hard to make the opener work, it did finally work but it’s not even close to be reliable.
It’s only working time to time. Sometimes I would ring and the door would open and very most of the time I have to ring up to 5 times to make it work.
And of course I never get any notification if someone is ringing.
SO for those who are interested and struggling like me with the Opener with this intercom model, I have installed the Ring Intercom from Ring alarm company and it works just perfectly fine.
Not only it opens the door 100% of the times, but as well you get notified and you can even speak through your intercome directly from your phone and depending on who is there you can open the door from your app. It’s juste 10000% better than the Opener
All the best,
2 Likes
With this little interface, it works perfect without any issues
Hi @Lukas . I was searching the Internet for this “BiNuki” Interface, but was not able to find it. The link provided show that this device is “no more” available. Do you may be have some link to share, where I can buy this BITICINO-NUKI Gateway ?
Thanks in advance.