Nuki opener + Bridge / Urmet 1133/15

[AnthonyAndre (Anthony André)]

Hello all,

I have an issue to connect my Nuki opener (with bridge) with my Urmet 1133/15. First, I can share the picture of inital connections, new connection with the Nuki and connection process I followed.

Results of these connections:

• I can open the the door without ringing to the intercom IF the trigger (surrounded in blue on the picture) is not actived (intercom is unhook)
• I can’t ring to the intercom with this connection. But, if I connect the 2 yellow wires to “CA”, the intercom can ring again. But, the Nuki can’t open the door.

Do you have any idea of what I did wrong?

Thanks by advance,

Anthony

[remsta (Remigi)]

Different model but this might help.

Opener: Guidance for Other Intercom (Urmet 1204/1)

So great news, everything works perfectly. @Gianluca_Mignano @kfournia @Syntocinon Whilst I still don’t know what model number I have, I stumbled across an italian forum where someone was trying to connect a Ring Doorbell and there is a person on there who replied. He said use Urmet 1130/1 and voila it worked straight away. Open, Ring to Open etc all work. PLC forum is where you want to ask your question. How to get the opener to work Hopefully this helps someone else too.

[AnthonyAndre (Anthony André)]

Hello Remigi,

Thanks for your reply. Not sure to understand. You think I may try installation process with Urmet 11130/1 instead of 1133/15?

Thanks for your help

[remsta (Remigi)]

Sorry, I was posting it to help you in case you wern’t able to get it working. Mine works perfectly, the only thing that doesn’t is that the doorbell at my actual apartment door doesn’t ring anymore. This isn’t so much of a problem because unless the neighbors need something, they never ring it. I haven’t been able to get this working, but the outside one works.