Installation Opener in digital telephone 3 wires Fermax

Nuki Beta Program Nuki Opener Beta
17

Still nothing?

18

A la espera estamos todo, indicaron 2 semanas

19

:sob:

20

Let’s hope to have news inside this week

21

2 semanas pero han pasado más, que tristeza.

Still nothing over there, i wrote to one of nuki team and no reply from him too.

22
23

Hello George

I forgot to tell you that the notifications of the opener do not work any.

Thank you

24

Hello Michel,
did you activate push notifications as described here https://nuki.io/en/blog/nuki-news/nuki-summer-update-2019/?
Best regards
Georg

25

Sorry but there is problem with ringing notification. In my case only works with intercom off.

26

Hello George

I have tried with the configuration that you have sent me for the suppression of the bell and it does not work, it does not even detect the intercom pulsation, and logically it does not open either.

What is clear that in my computer the cable that sends is blue, L, not positive +. I have tried to exchange the configuration that you have sent me between blue and red and neither, nor even opened.

I have been 2 hours and I have not achieved it, so I left it as I had it yesterday that at least it opened, but it has cost me a lot to also make it work, doing factory reset several times and putting the pin.

You’ll tell me when you do the lab tests.

Thank you

20191119_101752
20191119_1017522268×4032 1.7 MB
20191119_090434
20191119_0904342268×4032 1.82 MB

1 Like
27

Dear all,

image
image3024×4032 3.29 MB

I have old model Fermax City max Ads and I have to change it because it’s broken.
Cod : 94163b
Ref 24517
3 wires connection - and L and +

I order new one from Amazon.
Fermax Universal
Cod: 97397c
Ref: 3399
The problem I have only 3 wires, and the new one have input 6 4 3 2 1
Where I should connect the 3 wires I had.
Please let me know if you can help, and if no
Solution for the connection please let me know
Were I can find like the old model I had.
Best regards
BlackBearD

28

Dear Georg,

I have old model Fermax City max Ads and I have to change it because it’s broken.
Cod : 94163b
Ref 24517
3 wires connection - and L and +

I order new one from Amazon.
Fermax Universal
Cod: 97397c
Ref: 3399
The problem I have only 3 wires, and the new one have input 6 4 3 2 1
Where I should connect the 3 wires I had.
Please let me know if you can help me , and if no
Solution for the connection please let me know
Were I can find like the old model I had.
I’m living in Austria
Best regards
Abouchaar

29

Hi Abouchaar,
you got the wrong model. The one you chose is a 4+N analog system. you have to buy this one: Fermax 3390
Best regards
Georg

30

Hola Michael encantado.
Tengo el
Mismo interfono que tu.
Lograste hacerlo funcionar?
Te lo agradeceria muchisimo si me ayudaras.
Un saludo

31

Ya lo tienes funcionando!

32

can you share the knowledge? I’m trying to connect 8032 which is an analogue model with VDS.

33

Hi Jimmy. Juz read your posting. Did u manage to get your opener to work for lift access?? I tink I have the same intercomm as yours :sweat_smile:

20210106_101829
20210106_1018293000×4000 1.1 MB

34

Finally works? In my case I’ve tried everything, with no success :sob: :sob: Wich one is the right configuration left or right? with witch of profile: Generic Bus (Generic). Thank you!

35

Hi George, i have the FERMAX 3390 and can’t make it work. First it was detecting when ai pressed the open and the ring buttons but not opening the door, now it’s saying that the installation does not comply with the standard. I have reset to factory settings several times and nothing.

36

Hi! Have you a Foto of the wiring, I think I can help you!