MQTT Port (not 1883) Smart Lock 3.0 Pro

Discussion Integrations
1

Hi Community,
I have a brand new Smart Lock 3.0 Pro and wanted just to integrate into my smart home system.

I already have a MQTT broker running at port 1884 - I know 1883 is default. I really can’t change that running system.

I can’t get my Smart Lock 3.0 Pro connecting to that mqtt broker. In the APP I entered the local IP of the mqtt broker like

192.168.178.18
and
192.168.178.18:1884

But I will not connect.
Error code

8B
and
8D

Thanks for your support. Mira

2

Non standard MQTT ports are currently not supported. If you run a mosquitto server it should be relatively easy do add an additional listener on port 1883 through mosquitto.conf

3

Thank you, but I hope this will be possible in future.

4

I honestly cannot believe this :frowning: it is a really basic feature to be able to decide the port.
It makes impossible to configure on hardware (like ihost) where the port 1883/tcp is used for internally things.

Any idea if you’re going to allow us to use any port we need in the future?

5

Hi @Quique_Fdez_Guerra

we generally do not comment here on our roadmap.

But, one option could be to setup port-forwarding on your local router.

6

Or it’s using the port for other stuff as is a really common port.

That’s the main reason is something configurable in a lot of softwares. I hope you add to the roadmap in the future, this is sad for an expensive product.

7

Another interesting do you only support ipaddresses and not dynamic dns like tplinkdns right? another thing that I don’t understand.
No custom port
No custom dynamic dns (like duckdns, tplinkdns etc…) instead of ip

You’re making really difficult to use mqtt :confused: